Products

Tiny Compensation Synchro Tap Tool Holder

Tiny Compensation Synchro Tap Tool Holder Fits Chiron Center

Tiny Compensation Synchro Tap Tool Holder Fits Chiron Center.
INQUIRY
Description







1.Replace the traditional rigid tapping holder
The latest version of the V shank could solve a number of problems which caused by  lack of axial compensation function of traditional rigid tapping holder (ER shank). Compared with the traditional rigid tapping holder, we not only extend the tap (including the thread forming tap) life span significantly, but also has significantly improved tapping efficiency etc.. These advantages have been verified by a large number of comparison of V shank and rigid tapping holder. You can rest assured that the use of V Shank instead of the traditional rigid tapping holder would save cost saving, and improve production efficiency. 
2. To realize the possibility of rigid tapping for accuracy declined CNC equipment.
The development of CNC machine tool synchronization technology has facilitated the traditional rigid tapping. However, with the use of machine, the accuracy of CNC machine tools will gradually decline, which will cause some CNC equipment can not tap by traditional rigid tapping holder. Our V-shank has the ability to re-implement rigid tapping due to its micro-compensation function, on the basis of the equipment precision is not exceeded the range of V-shank compensation. It also could improve the processing capacity of your CNC equipment and reduce processing cost.
3. Bring CNC tapping hope for current hand tapping users.
Processed materials, tap, tool holder, machine center, coolant etc.. in the process of tapping , may cause the CNN tapping could not be gained. As a part of processing, the application of the V shank provides a means for improving the technology and bring hope for CNC tapping. You could try the V Shank instead of hand tapping to improve efficiency, but we didn’t exclude the possibility that V shank could not solve your problem.
Precautions
1. Rigid tapping is sensitive with runout. 0.05mm runout for far end is appropriate recommended.
2.  The effective depth of the tapping should be within the range which the tap manufacturer recommended (usually 2D), otherwise the tap is easy to break.
3. When blade angle tap is tapping through hole thread, the taper blade angle groove should be completely over the bottom of the hole, otherwise the tap is easy to break.
4. The tapping speed should not be higher than the tap speed recommended by the tap manufacturer.